Fueling; Fuel Safety; Fuel Handling Fuel - RedMax GZ380 Owner's/Operator's Manual

Fueling

WARNING!
Taking the following
precautions will lessen the risk of
fire:
Do not smoke and do not place any
hot objects in the vicinity of fuel.
Always stop the engine and let it
cool for a few minutes before re-
fueling.
When refueling, open the fuel cap
slowly so that any excess pressure
is released gently.
Tighten the fuel cap carefully after
refueling.
Always move the machine away from
the refueling area before starting.
Clean the area around the fuel cap. Clean
the fuel and chain oil tanks regularly. The fuel
filter must be replaced at least once a year.
Contamination in the tanks causes malfunc-
tion. Make sure the fuel is well mixed by
shaking the container before refuelling. The
capacities of the chain oil tank and fuel tank
are carefully matched. You should therefore
always fill the chain oil tank and fuel tank at
the same time.
WARNING:
Fuel and fuel vapors
are highly flammable. Take care
when handling fuel and chain oil.
Be aware of the risks of fire, explo-
sion and those associated with
inhalation.
To extend engine life, avoid:
1. FUEL WITH NO OIL (RAW GASOLINE) - -
It will cause severe damage to the internal
engine parts very quickly.
2. GASOHOL - - It can cause deterioration of
rubber and/or plastic parts and disruption of
engine lubrication.
3. OIL FOR 4- -CYCLE ENGINE USE - - It can
cause spark plug fouling, exhaust port
blocking, or piston ring seizure.
4. Mixed fuels which have been left unused
for a period of one month or more may
clog the carburetor and result in the engine
failing to operate properly.
5. In the case of storing the product for a long
period of time, clean the fuel tank after ren-
dering it empty. Next, Start the engine and
run the carburetor dry residual fuel.
6. In the case of scrapping the used mixed oil
container, scrap it only at an authorized
depository site.
115391326 Rev. 3 1/31/11
FUEL HANDLING

Fuel safety

S Never refuel the machine while the engine is
running.
S Make sure there is plenty of ventilation when
refueling or mixing fuel (gasoline and
2- -stroke oil).
S Move the machine at least 10 feet (3 meters)
from the refueling point before starting it.
S Never start the machine:
S If you have spilled fuel or chain oil on
the machine. Wipe off the spillage and
allow remaining fuel to evaporate.
S If you have spilled fuel on yourself or
your clothes, change your clothes.
Wash any part of your body that has
come in contact with fuel. Use soap
and water.
S If the machine is leaking fuel. Check
regularly for leaks from the fuel cap
and fuel lines.
WARNING:
chine with visible damage to the
spark plug guard and ignition
cable. A risk of sparking arises,
which can cause a fire.
Transport and storage
S Always store the chain saw and fuel so
that there is no risk of leakages or fumes
coming into contact with sparks or naked
flames from electrical equipment, electric
motors, relays/switches, boilers and the
like.
S Always store fuel in an approved con-
tainer designed for that purpose.
S For longer periods of storage or for
transport of the chain saw, the fuel and
chain oil tanks should be emptied. Ask
where you can dispose of waste fuel and
chain oil at your local gas station.
S Ensure the machine is cleaned and that
a complete service is carried out before
long- -term storage.
S The bar guard must always be fitted to
the cutting attachment when the machine
is being transported or in storage in
order to prevent accident contact with
the sharp chain. Even a non- -moving
chain can cause serious cuts to yourself
or persons you bump into with an ex-
posed chain.
Long- -term storage
Empty the fuel/oil tanks in a well ventilated
area. Store the fuel in approved cans in a
safe place. Fit the bar guard. Clean the
machine. See instructions under the head-
ing Maintenance schedule.
Never use a ma-
English--- 18