5 B S Tep 1 - Connecting A Digital Output; 6 B C Onnecting The Dual Aes Interface - DCS Vivaldi Transport User Manual

dCS Vivaldi Transport User Manual
S TEP 1 – Connecting a Digital Output
1 5 B
Whether you are playing a CD or an SACD, the
PCM outputs carry 16/44.1 PCM data. Most owners connect the
prefer to listen to CDs in the native 16 bit 44.1kS/s format.
C onnecting the Dual AES interface
4 6 B
When used with a Vivaldi DAC,
• Connect the
AES2
the output to the AES2 input, using two XLR cables. Ensure the cables are not swapped.
• Press the DAC's
The DAC will lock to the source, displaying the
Analogue
outputs
to Amplifier
You can connect the Transport to the DAC's
special features which are intended for use with the Vivaldi Upsampler.
Vivaldi Transport Manual v1_2x
AES1+2
AES1
output on the Transport to the AES1 input on the Vivaldi DAC rear panel and
Input
button repeatedly until
Figure 1 – Basic setup
AES1+2
interface carries DSD data and all of the
is the main output.
AES1+2
is displayed.
Audio Sync
AES3+4
Page 9
Software Issue 1.2x
AES1+2
interface only, but some
icon and DSD.
input if you wish, but this input has
English version
April 2015