Table of Contents
Advertisement
dCS Vivaldi Transport User Manual
C onnecting the AES3 or an SPDIF output
4 7 B
• Connect one of the outputs on the Transport to the matching input on the DAC using a suitable
cable.
• Press the DAC
Input
AES1, AES2, AES3, AES4, SPDIF1, SPDIF2
The DAC will lock to the source, displaying the
C onnecting the SDIF-2 interface
4 8 B
• Connect the
CH1
output on the Transport to the
CH2
input, using two BNC cables. Connect the Transport's
In1
connector on the DAC. Ensure the cables are not swapped.
• Press the DAC
Input
The DAC will lock to the source, displaying the
Why does the DAC display 0/44.1? Is the Transport faulty?
No, the Transport is working correctly. When a CD is loaded but is not playing, a
44.1kS/s carrier signal is being transmitted but there is no data – just digital silence. The
DAC correctly reports zero active data bits until the disc starts playing, then it detects 16
active bits and updates the display.
Proceed to Step 2.
Vivaldi Transport Manual v1_2x
button repeatedly until your chosen input is displayed. This will be either
button repeatedly until
Page 10
SPDIF3
or
(BNC).
Audio Sync
CH1
input on the DAC and the
Word Clock Out
SDIF-2
appears on the display.
icon and 0/44.1.
W1 Sync
0/44.1
may be displayed briefly between tracks also.
Software Issue 1.2x
April 2015
icon and 0/44.1.
CH2
output to the
Word Clock
to the
English version
Advertisement
Table of Contents
