Table of Contents
Advertisement
dCS Vivaldi Transport User Manual
TRANSPORT SETTINGS
Layer
When a hybrid disc is loaded but is not playing, the
either the
...or
CD
layer. While changing layers and re-reading the disc,
Wait
is displayed.
PCM Enable
This page turns the 16/44.1 PCM outputs (AES3, SPDIF1,
...and off. This gives a quieter electrical environment when you are using the
interface only.
Remember to turn the PCM outputs on again if you want to use them!
Upsampling Mode
While playing a CD, this page sets the format of the
either encrypted
...or
DXD
There is no need for an "Upsampling Off" setting.
If you want to listen to the 16/44.1 data unprocessed, connect one of the PCM format
outputs (AES3, SPDIF1, etc.) directly to the DAC and select that input.
RS232 Mode
Sets the RS232 interface to either Text mode for use with 3
...dCS production Binary mode, which is intended for factory use only.
Vivaldi Transport Manual v1_2x
Menu
SACD
layer...
DSD
(1 bit at 2.822MS/s)...
(24 bits at 352.8kS/s).
Layer
AES1+2
Page 22
Software Issue 1.2x
April 2015
page allows you to select
Changing Layer - Please
SPDIF2
& SDIF) on...
AES1+2
Dual AES interface to
rd
-party control systems or...
English version
Advertisement
Table of Contents
