Table of Contents
Advertisement
dCS Vivaldi Transport User Manual
G ENERATOR
Menu
3 9 B
Channel Check
A routine to test the system for swapped channels. A tone is output on the left channel
only while the display shows Left, then the right channel only while the display shows
Right. If these are the wrong way around, the left and right channels are swapped
somewhere in your system.
Phase Check
A routine to test the system for phase reversals. Noise is output in phase on both
channels while the display shows
right channel is inverted while the display shows
produce a central image, the second burst should not. If these are the wrong way
around, one channel in your system is phase inverted. Press the
the test and return to the menu.
Burn In
A procedure to condition your system. The unit displays
outputs modulated pink noise that ramps up and down slowly in level. Press the
◄
►
or
buttons to stop the procedure.
!
Please ensure that the volume level is reasonable, as careless use of the
can damage your amplifiers and loudspeakers. dCS will not be liable for such damage.
Vivaldi Transport Manual v1_2x
In
Phase. Press the
Out of
Page 24
Software Issue 1.2x
Menu
button, the noise on the
Phase. The first burst should
◄
►
or
button to stop
Burn In Caution!
Loud, then
Burn In
English version
April 2015
Menu
or
feature
Advertisement
Table of Contents
