Table of Contents
Advertisement
dCS Vivaldi Transport User Manual
S TEP 3 – Playing a Disc
1 7 B
• Press the
Stop/Eject
The display will show OPEN.
• Load a CD or SACD into the tray with the label upwards and either push the tray in gently or press
Stop/Eject
the
button again.
The display will show CLOSE, then LOADING. The disc type will be identified, either
logo will appear on the display, along with the number of tracks and the total playing time. The
Transport will play the SACD layer of a hybrid disc by default, but if you wish, you can select the CD
layer instead by pressing the
• Press the
Play
button. Turn up the Volume to a comfortable level.
You should have audio. For all discs, the disc type and elapsed time will be displayed.
• Press the
Play/Pause
• Press the
Fwd
Rwd
or
• Hold down the
Fwd
hold the button down. Most owners will use the remote control for this.
• Press the
Stop/Eject
The Remote Control gives access to other features, such as track number selection, display time
selection, repeat track or disc and programming a track sequence.
To program the track sequence 6 - 8, stop the disc and press the remote
Transport will display
change to 6PGM1. Press
cancels the last track entry. Start the disc to play the track sequence. To cancel Program Mode, press
Program
the remote
button or open the CD tray.
The next step is crucial – sit back and enjoy the music.
When you have finished listening, you can either keep the system warm by setting it to Sleep mode
Power
(press the
button briefly) or switch off (hold down the
displayed, then release).
F urther suggestions
1 8 B
• If you wish, you can set the
instead of DSD, by changing the
• If you are using the
22
).
X
X
• If you are using a Vivaldi Master Clock, try turning the
88.2kHz
frequency to
information.
• If you have a Vivaldi Upsampler, try driving it with CD data from one of the Transport's PCM
outputs and setting the Upsampler's
Upsampler manual for more information.
• If you have a complete 4-box Vivaldi system, please see the Upsampler or DAC manuals for set-up
information.
• If you turn on the
EasyPlay
DAC's input to match the disc type. For example, loading an SACD can select the native DSD feed
from the Transport, while loading a CD can select the data from a Vivaldi Upsampler.
Vivaldi Transport Manual v1_2x
button.
Layer
button.
button to pause playing, press again to resume playing.
button to skip to the next track or the previous track.
Rwd
or
button to jog through the track - the speed will increase the longer you
button to stop the disc. Press it again to open the tray.
PGM Mode
then 0PGM0. As an example, press
8
08
– the display will change to 8PGM2. The remote
or
AES1+2
output to generate
Settings > Upsampling Mode
AES1+2
output only, try setting the
or 176.4kHz. Please refer to the Vivaldi Master Clock manual for more
Output
feature in the Vivaldi DAC, loading a disc will automatically change the
Power
DXD
data (24/352.8) when playing a CD
menu page (see page
PCM Enable
Dither
feature on. Try changing the Clock
DSD
352.8
to
or
(DXD). Please refer to the Vivaldi
Page 13
Software Issue 1.2x
CD
or the SACD
Program
button – the
6
06
or
– the display will
Clear
SWITCHING OFF
button until
22
).
X
X
menu page to
Off
English version
April 2015
button
is
(see page
Advertisement
Table of Contents
