Table of Contents
Advertisement
dCS Vivaldi Transport User Manual
Test interface
RS232
This
interface (R) has two modes, set by the
• Binary mode is used to remotely control the unit during automated production testing at dCS.
• Text mode is for use with a household automation system. If you would like to use this mode,
please download the list of remote control commands from
The interface is designed to be used with a "straight through" cable, wired pin 1 to pin 1, etc.
The pin connections are:
• Pin 2 – dCS unit transmit
• Pin 3 – dCS unit receive
• Pin 5 – ground
• Shell – cable screen & drain wire
We recommend using infra-red remote control instead.
Mains inlet
Power is connected via a standard IEC320 connector (S), protected by a fuse and isolated by a 2-pole
power switch.
Label
The label (T) states the unit's serial number and the nominal voltage to which the unit is set. It is
important to quote the serial number if you need assistance.
Vivaldi Transport Manual v1_2x
Settings > RS232
www.dcsltd.co.uk
Page 18
Software Issue 1.2x
April 2015
menu page.
.
H
English version
Advertisement
Table of Contents
