Table of Contents
Advertisement
dCS Vivaldi Transport User Manual
CONFIGURATION
Settings Lock
When set to Locked, this icon is displayed and the following settings cannot be changed:
•
PCM Enable
•
Upsample Mode
•
Save Configuration
•
Restore Configuration
•
Factory Reset
Set to
Unlocked
Save Configuration
Once the unit is set up the way you want it, select
If you deliberately change the setup later and want to keep it, select
the changes.
Restore Configuration
If the unit settings are accidentally changed, select
saved earlier.
Factory Reset
Resets the unit to standard settings. These are:
•
PCM Enable
•
Upsample Mode
•
Brightness
•
Display
•
RS232
DISPLAY SETTINGS
Brightness
Set the display
Menu
button to exit.
Display On/Off
This page is usually set to On.
When set to
display will turn on briefly when a control setting is changed. The display will stay on if
the CD tray is open or the menu is open.
Vivaldi Transport Manual v1_2x
Menu
is disabled
is disabled
is disabled
if you need to change these settings.
to
On
to
DSD.
to maximum.
to On.
Mode to Binary.
Menu
Brightness
to a comfortable level using the
Off
and the menu closes, the display will turn off after a few seconds. The
Save
to store the settings in memory.
Restore
Page 23
Software Issue 1.2x
April 2015
Save
again to store
to reload the settings you
◄
►
or
buttons. Press the
English version
Advertisement
Table of Contents
