Table of Contents
Advertisement
dCS Vivaldi Transport User Manual
S
PECIFICATION
5 B
Mechanism type
Digital outputs
Clocking
Size and weight
Power requirements
These specifications are subject to change without notice.
Vivaldi Transport Manual v1_2x
TEAC Esoteric VRDS NEO
Dual AES interface on 2x 3-pin male XLR connectors (AES1+2).
While an SACD is playing, the interface outputs encrypted DSD data.
While a CD is playing, the
interface to output either encrypted
data (24 bits at 352.8kS/s).
AES/EBU on 3-pin male XLR connector (AES3). Outputs 16/44.1 data,
whether a CD or SACD is playing.
2x SPDIF on 1x RCA Phono and 1x BNC connectors. Each outputs 16/44.1
data, whether a CD or SACD is playing.
1x SDIF-2 interface on 2x BNC connectors, outputs 16/44.1 data, whether a
CD or SACD is playing.
Word Clock
Output on 1x BNC connector. With the transport in Master
mode, a TTL-compatible 44.1kHz word clock derived from the internal crystal
oscillator is available on this output. The calibration accuracy when shipped is
+/-10ppm, not temperature compensated. Calibration usually remains stable
for several years.
Word Clock
Input on 1x BNC connector, accepts standard word clock at
44.1, 88.2 or 176.4kHz. Sensitive to TTL levels. Lock range is +/-300ppm.
444mm (17.5") long x 435mm (17.2") deep x 196mm (7.8") high. Allow extra
depth for cable connectors. Allow space for air flow around the unit.
23.2kg (51.1lbs).
Internally set to either 100, 115/120, 220 or 230/240V AC, 49 – 62Hz.
Power consumption: 28W typical, 40W maximum.
Consumes less than 0.5W when powered down from the front panel.
Page 25
®
VMK3 dual laser CD/SACD mechanism.
Settings > Upsample Mode
DSD
data (1 bit at 2.822MS/s) or
Software Issue 1.2x
April 2015
menu page sets the
DXD
English version
Advertisement
Table of Contents
