Working with Media
Loading Roll Media
When pulling to
align the edges to
the roll, make sure
the end of the
paper hangs down
at least to the level
of the roll.
12 Close the roll cover and press the ↓ key.
3-18
d Take hold of the edges of the media now extending from the exit slot and pull the
media toward you until taut. Then align the left and right edges of the media, so
that they are flush with the edges of the roll.
e When you have aligned the media lift the lever.
Lift lever
after aligning
after aligning
f The printer checks that the media is aligned properly. If the alignment is
successful the front panel displays:
Close roll cover
Continue--------->
C4704016
C4723127
C4704131