Installing A Roll - HP DesignJet 3500CP Quick Start Manual

Installing a New Roll into the Printer
1 If an empty spindle is installed in the printer, open the roll cover and remove the
2 Remove the new roll from its wrapping.
3 HP Heavyweight Coated Paper is the only media that is compatible with both the
empty spindle by pulling firmly on each end, A and then B as shown below.
HP DesignJet CP Ink System and the HP DesignJet CP Ink System UV. Therefore,
if you have changed the Ink System and the media you are loading is incompatible
with the new Ink System, the printer will automatically reject the non-compatible
media. See page 3-2, Choosing Media.
Installing a New Roll into the Printer
B
Working with Media
A
C4723118
3-33