Shift Button (Optional); Special Buttons (Optional); Dispensing Hot Water - WMF 2000S User Manual

2.4

Shift button (optional)

Each beverage button may be doubly assigned.
Level 1 always active.
™ Press the shift button
Level 2 activated.
™ Press the desired beverage button
Level 1 is active again after dispensing a beverage at
Level 2.
2.5

Special buttons (optional)

Special buttons for beverage sizes S and L are optionally
available on the control panel. These are preselection
buttons which establish the desired amount of the
beverage before selection of the beverage.
M = amount of the beverage set, no preselection
S = approx. 25 % less than M
L = approx. 25 % more than M
2.6

Dispensing hot water

™ Press the hot water button
Dispensing occurs.
If less water is required than the pre-set dispense amount,
dispensing can be stopped by pressing the hot water
button again.
User Manual WMF 2000 S
Operation
2x
Shift button (active / inactive)
w S oftware w S ettings
w O perating options
page 33
11