Your WMF 2000S is provided with a diagnostics program.
Any errors that occur are shown on the display. The error
messages listed may also be caused by an interruption to
the mains electricity supply.
If there is a current error or a message to the operator, the
pad is displayed.
Touch
Error number is displayed.
Error
Error
number
description
6
Brewing unit lockup
current / brewing
unit stiff
26
Right grinder
blocked
36
Left grinder blocked
88
Boiler:
over-temperature
89
Boiler:
heat-up time error
User Manual WMF 2000 S
Messages and instructions
Action instructions
Switch off the coffee machine
Clean the brewing unit
w C are w B rewing unit cleaning, page 45
Switch off the coffee machine
Disconnect mains plug
Remove bean hopper
Turn grinder disk counter-clockwise using only
Multitool (square button) (see illustration)
Replace hopper
Switch on the coffee machine
w C are w B ean hopper cleaning, page 47
If this occurs frequently:
Set grinding degree one stage coarser
w O ther settings w S et grinding degree, page 38
Switch off the coffee machine, allow to cool and
switch on again
If error not remedied
Switch off the coffee machine
Call WMF Service
Switch off the coffee machine and on again
55