Sidestand; Ignition Circuit Cut-Off System - Yamaha NMX GPD125-A Owner's Manual

Sidestand

The sidestand is located on the left
side of the frame. Raise the sidestand
or lower it with your foot while holding
the vehicle upright.
TIP
The built-in sidestand switch is part of
the ignition circuit cut-off system,
which cuts the ignition in certain situa-
tions. (See the following section for an
explanation of the ignition circuit cut-
off system.)
WARNING
The vehicle must not be ridden with
the sidestand down, or if the side-
stand cannot be properly moved up
(or does not stay up), otherwise the
sidestand could contact the ground
and distract the operator, resulting
in a possible loss of control.
Yamaha's ignition circuit cut-off
system has been designed to assist
the operator in fulfilling the respon-
sibility of raising the sidestand be-
fore starting off. Therefore, check
EAU15306 this system regularly and have a
Yamaha dealer repair it if it does not
function properly.
EWA10242
Instrument and control functions

Ignition circuit cut-off system

Check the operation of the sidestand
switch according to the following pro-
cedure.
3-17
EAUT1096
3