Yamaha NMX GPD125-A Owner's Manual page 23

TRIP F → TRIP 1 → TRIP 2 → OIL TRIP
→ V-BELT TRIP → F/ECO → AVE
F/ECO → ODO → TRIP F
To reset a tripmeter, select it by push-
ing the "SELECT" button, and then
push the "RESET" button for at least
one second.
TIP
 If you do not reset the fuel reserve
tripmeter manually, it resets itself
automatically and the display re-
turns to the prior mode after refu-
eling and traveling 5 km (3 mi).
 If you do not reset tripmeters 1
and 2, they will reset to 0 and con-
tinue counting after 9999.9 has
been reached.
 The odometer will lock at 999999
and cannot be reset.
Instrument and control functions
Instantaneous fuel consumption
mode
1
1. Instantaneous fuel consumption display
The instantaneous fuel consumption
display can be set to either "km/L" or
"L/100 km", and either "MPG" or
"L/100 km" (for the UK).
 "km/L": The distance that can be
traveled on 1.0 L of fuel under the
current riding conditions is shown.
 "L/100 km": The amount of fuel
necessary to travel 100 km under
the current riding conditions is
shown.
 "MPG": The distance that can be
traveled on 1.0 lmp. gal of the fuel
under the current riding conditions
is shown.
3-7
To switch between the instantaneous
fuel consumption display settings,
push the "SELECT" button for one sec-
ond.
TIP
 If traveling at speeds under 10
km/h (6 mi/h), "_ _._" is displayed.
 When MPG is selected, no units
indicator will be displayed.
Average fuel consumption mode
1
1. Average fuel consumption display
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either "km/L" or "L/100
km", and either "MPG" or "L/100 km"
(for the UK).
3