Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Related Manuals for IBASE Technology MI805
Summary of Contents for IBASE Technology MI805
- Page 1 MI805 Intel® Celeron® QC J1900 Mini-ITX Motherboard USER’S MANUAL Version 1.1...
- Page 2 Intel and Luna-Pier are registered trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation. Winbond is a registered trademark of Winbond Electronics Corporation. All other product names or trademarks are properties of their respective owners. MI805 User’s Manual...
-
Page 3: Table Of Contents
MI805 Specifications ............3 Board Dimensions ............... 5 Installations ............6 Installing the Memory ............7 Setting the Jumpers ............. 8 Connectors on MI805 ............14 BIOS Setup ............29 Drivers Installation ........43 Intel Chipset Software Installation Utility......44 VGA Drivers Installation .......... - Page 4 This page is intentionally left blank. MI805 User’s Manual...
-
Page 5: Introduction
INTRODUCTION Introduction MI805 is a Mini ITX board (170mm x 170mm) that comes with the Intel Intel® Celeron® QC J1900 processor that runs at 2.0GHz and has two DDR3 SO-DIMM sockets supporting up to 8GB of system memory. It supports the Intel® Gen7 w/ 4EUs graphics engine with interface for CRT, DVI-D and 24-bit dual channel LVDS displays. -
Page 6: Checklist
INTRODUCTION Checklist Your MI805 package should include the items listed below. The MI805 Mini-ITX motherboard This User’s Manual 1 CD containing chipset drivers and flash memory utility Serial ATA cable I/O shield MI805 User’s Manual... -
Page 7: Mi805 Specifications
2x5 pins header x 1 for Digital I/O (2.54 pitch type) 4-pin header for speaker out (from ALC269 internal amplifier) 2x4 pins header x1 for front I/O panel (2.54 pitch type) 2 x 2 pins connector x1 for 12V power-in MI805 User’s Manual... - Page 8 - Window Embedded 8 - Windows 7 (32-bit; 64-bit) - Linux (Fedora) RoHS CE /FCC/LVD Certification Operation Temperature: 0~60 degree C Environment Storage Temperature: -40 ~ 80 degree C Relative humidity: 0~90%, non-condensing 170mm x 170mm Board Size MI805 User’s Manual...
-
Page 9: Board Dimensions
INTRODUCTION Board Dimensions MI805 User’s Manual... -
Page 10: Installations
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the MI805 in order to set up a workable system. The topics covered are: Installing the Memory ..............7 Setting the Jumpers ................. 8 Connectors on MI805 ..............14... -
Page 11: Installing The Memory
INSTALLATIONS Installing the Memory The MI805 board supports two DDR3-1333 memory slots. Remarks: J1900 supports two SO-DIMM (w/o ECC) modules. Total maximum memory supported is 8GB. Installing and Removing Memory Modules To install the DDR3 modules, locate the memory slot on the board and perform the following steps: 1. -
Page 12: Setting The Jumpers
INSTALLATIONS Setting the Jumpers Jumpers are used on MI805 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on MI805 and their respective functions. -
Page 13: Jumper Locations On Mi805
INSTALLATIONS Jumper Locations on MI805 Jumper Locations on MI805 ............. Page J1: LCD Backlight Adjustment ............10 JP2: LVDS Panel Brightness Control Selection ........10 J6: LVDS Panel Power Selection ............11 JP4: COM1/COM2 RS232 RI/+5V/+12V Power Setting ....11 JP6: Clear CMOS Contents .............. -
Page 14: J1: Lcd Backlight Adjustment
INSTALLATIONS J1: LCD Backlight Adjustment Setting Panel Voltage Pin 1-2 DC Mode Short/Closed (default) Pin 2-3 PWM Mode Short/Closed JP2: LVDS Panel Brightness Control Selection Brightness Control (PWM mode) Open 3.3V Close 5V(Default) MI805 User’s Manual... -
Page 15: J6: Lvds Panel Power Selection
J6: LVDS Panel Power Selection Setting Panel Voltage Pin 1-2 3.3V (default) Short/Closed Pin 2-3 Short/Closed JP4/JP5: COM1/COM2 RS232 RI/+5V/+12V Power Setting JP4/JP5 Setting Function Pin 1-3 - Short/Closed +12V Pin 3-4 - Short/Closed Pin 3-5 - Short/Closed MI805 User’s Manual... -
Page 16: Jp6: Clear Cmos Contents
INSTALLATIONS JP6: Clear CMOS Contents Setting Function Pin 1-2 Normal Short/Closed Pin 2-3 Clear CMOS Short/Closed JP7: Clear ME Contents Setting Function Pin 1-2 Normal Short/Closed Pin 2-3 Clear ME Short/Closed REGISTER MI805 User’s Manual... -
Page 17: Jp8: Factory Use Only
INSTALLATIONS JP8: Factory use only MI805 User’s Manual... -
Page 18: Connectors On Mi805
INSTALLATIONS Connectors on MI805 The connectors on MI805 allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on MI805 and their respective functions. Connector Locations on MI805 ............15 CN1 / CN2: SATA2 Connector ............ -
Page 19: Connector Locations On Mi805
INSTALLATIONS Connector Locations on MI805 MI805 User’s Manual... -
Page 20: Cn1 / Cn2: Sata2 Connector
INSTALLATIONS CN1 / CN2: SATA2 Connector CN3: DC_IN Connector +12V~24V CN4: CRT+DVI Connector Signal Name Pin # Pin # Signal Name Green Blue N.C. N.C. DDCDATA HSYNC VSYNC DDCCLK MI805 User’s Manual... -
Page 21: Cn5: Com1 / Com2
N.C. N.C. DDCCLK DDCDATA N.C. DATA1- DATA1+ N.C. N.C. Hot Plug Detect DATA0- DATA0+ N.C. N.C. CLK+ CLK- CN5: COM1 / COM2 Pin # Signal Name RS-232 R2-422 RS-485 DATA- DATA+ Ground Ground Ground CN6: USB3.0 Connector MI805 User’s Manual... -
Page 22: Cn7: Gigabit Lan
INSTALLATIONS CN7: Gigabit LAN CN8: Gigabit LAN / USB 2.0 Connector CN9: Audio Connector MI805 User’s Manual... -
Page 23: J2, J3: Lvds Connectors, Hirose Df20G-20Dp-1V
J2, J3: LVDS Connectors, Hirose DF20G-20DP-1V J3: First Channel LVDS; J2: Second Channel LVDS Signal Name Pin # Pin # Signal Name TX0N TX0P Ground Ground TX1N TX1P Ground Ground TX2N TX2P Ground Ground CLKN CLKP Ground Ground TX3N TX3P Power Power MI805 User’s Manual... -
Page 24: J4, J5: Sata Hdd Power Connectors
INSTALLATIONS J4, J5: SATA HDD Power Connectors Pin # Signal Name Ground Ground +12V J7: DC_IN Connector Pin # Signal Name +12V to +24V +12V to +24V MI805 User’s Manual... -
Page 25: J8 / J9: Mini Pcie Slot (J8 Msata Only)
INSTALLATIONS J8 / J9: Mini PCIE Slot (J8 mSATA Only) J10: USB 2.0 Pin header Signal Name Pin # Pin # Signal Name Ground Ground MI805 User’s Manual... -
Page 26: J11: Ddr3L So-Dimm (Ch-A) Sockets
INSTALLATIONS J11: DDR3L SO-DIMM (CH-A) Sockets J13: DDR3L SO-DIMM (CH-B) Sockets J12: MCU JTAG MI805 User’s Manual... -
Page 27: J14: Amplifier Connector
INSTALLATIONS J14: Amplifier Connector Pin # Signal Name OUTL+ OUTL- OUTR- OUTR+ J15: Front Panel Pin # Pin # Signal Name Signal Name PWR_BTN 3.3V HDD Active Reset MI805 User’s Manual... -
Page 28: J16: Audio Connector (Df11-12Dp-2Dsa)
INSTALLATIONS J16: Audio Connector (DF11-12DP-2DSA) Signal Name Signal Name Pin # Pin # LINEOUT_R LINEOUT_L Ground JD_FRONT LINEIN_R LINEIN_L Ground JD_LINEIN MIC-R MIC_L Ground JD_MIC1 #J16 & CN9 ether One (Only one output) MI805 User’s Manual... -
Page 29: J17: Digital I/O
Pin # Pin # Signal Name DCD, Data carrier detect RXD, Receive data TXD, Transmit data DTR, Data terminal GND, ground DSR, Data set ready RTS, Request to send CTS, Clear to send RI, Ring indicator Not Used MI805 User’s Manual... -
Page 30: Jp1: Lcd Backlight Connector
INSTALLATIONS JP1: LCD Backlight Connector Pin # Signal Name +12V Backlight Enable Brightness Control Ground JP3: For SPI Debug tools Pin Header MI805 User’s Manual... -
Page 31: Jp9: Debug Port
INSTALLATIONS JP9: Debug Port CPU_FAN1: CPU Fan Power Connector Pin # Signal Name Ground +12V Rotation detection Control MI805 User’s Manual... -
Page 32: Sys_Fan1: System Fan1 Power Connector
INSTALLATIONS SYS_FAN1: System Fan1 Power Connector Pin # Signal Name Ground +12V Rotation detection Control PCIE1: PCI Express_x1 Slot MI805 User’s Manual... -
Page 33: Bios Setup
The topics covered in this chapter are as follows: BIOS Introduction ..................30 BIOS Setup ....................30 Advanced Settings ..................32 Chipset Settings .................... 39 Security Settings ................... 40 Boot Settings ....................41 Save & Exit Settings ..................42 MI805 User’s Manual... -
Page 34: Bios Introduction
<PgUp> and <PgDn> keys to change entries, <F1> for help and <Esc> to quit. When you enter the Setup utility, the Main Menu screen will appear on the screen. The Main Menu allows you to select from various setup functions and exit choices. MI805 User’s Manual... - Page 35 F1: General Help F2: Previous Values F3: Optimized Default F4: Save ESC: Exit System Date Set the Date. Use Tab to switch between Data elements. System Time Set the Time. Use Tab to switch between Data elements. MI805 User’s Manual...
-
Page 36: Advanced Settings
Enable Hibernation Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This option may be not effective with some OS. ACPI Sleep State Select ACPI sleep state the system will enter when the SUSPEND button is pressed. MI805 User’s Manual... - Page 37 Temperature Guardian Generate the reset signal when system hangs up on POST Schedule Slot 1 / 2 Setup the hour/minute for system power on. Brightness Control LVDS Backlight Brightness Control MI805 User’s Manual...
-
Page 38: Super Io Configuration
► Serial Port 5 Configuration F4: Save & Exit ► Serial Port 6 Configuration ESC: Exit Serial Port Configuration Set Parameters of Serial Ports. User can Enable/Disable the serial port and Select an optimal settings for the Super IO Device MI805 User’s Manual... - Page 39 90 ℃/194 F 95 ℃/203 F Temperatures/Voltages These fields are the parameters of the hardware monitoring function feature of the motherboard. The values are read-only values as monitored by the system and show the PC health status MI805 User’s Manual...
-
Page 40: Cpu Configuration
Select Screen CPU Speed 2001 Mhz ↑↓ Select Item 64-bit Supported Enter: Select Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Socket 0 CPU Information Socket specific CPU Information. MI805 User’s Manual... -
Page 41: Cpu Ppm Configuration
Security Save & Exit CPU PPM Configuration EIST Enabled → ← Select Screen ↑↓ Select Item Enter: Select Change Field F1: General Help F2: Previous Values F3: Optimized Default F4: Save ESC: Exit EIST Enable/Disable Intel SpeedStep. MI805 User’s Manual... -
Page 42: Ide Configuration
Serial –ATA Port 0 Enabled / Disabled Serial Port 0 SATA Port0 HotPlug Enabled / Disabled SATA Port 0 HotPlug Serial –ATA Port 1 Enabled / Disabled Serial Port 1 SATA Port1 HotPlug Enabled / Disabled SATA Port 1 HotPlug MI805 User’s Manual... -
Page 43: Chipset Settings
Select Screen ↑↓ Select Item Total Memory 4096 MB (LPDDR3) Enter: Select Change Opt. F1: General Help Memory Slot0 4096 MB (LPDDR3) Memory Slot2 Not Present F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit MI805 User’s Manual... -
Page 44: Security Settings
F1: General Help Minimum length F2: Previous Values Maximum length F3: Optimized Defaults F4: Save & Exit Administrator Password ESC: Exit User Password Administrator Password Set Administrator Password. User Password Set User Password MI805 User’s Manual... -
Page 45: Boot Settings
Enables or disables Quiet Boot option. Fast Boot Enables or disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options. Boot Option Priorities Sets the system boot order. MI805 User’s Manual... -
Page 46: Save & Exit Settings
Discard Changes done so far to any of the setup options. Restore Defaults Restore/Load Defaults values for all the setup options. Save as User Defaults Save the changes done so far as User Defaults. Restore User Defaults Restore the User Defaults to all the setup options. MI805 User’s Manual... -
Page 47: Drivers Installation
Realtek High Definition Audio Driver Installation ......46 Intel Trusted Execution Engine Installation ........47 LAN Drivers Installation ..............48 IMPORTANT NOTE: After installing your Windows operating system, you must install first the Intel Chipset Software Installation Utility before proceeding with the drivers installation. MI805 User’s Manual... -
Page 48: Intel Chipset Software Installation Utility
Next to continue. 4. Click Yes to accept the software license agreement and proceed with the installation process. 5. The Setup process is now complete. Click Finish to restart the computer and for changes to take effect. MI805 User’s Manual... -
Page 49: Vga Drivers Installation
2. When the Welcome screen appears, click Next to continue. 3. Click Yes to accept the license agreement and continue the installation. 4. Setup complete. Click Finish to restart the computer and for changes to take effect. MI805 User’s Manual... -
Page 50: Realtek High Definition Audio Driver Installation
Intel(R) Baytrail Chipset. Click Realtek High Definition Audio Driver. 2. On the Welcome screen, click Next to proceed with the installation. 4. InstallShield Wizard is complete. Click Finish to restart the computer and for changes to take effect. MI805 User’s Manual... -
Page 51: Intel Trusted Execution Engine Installation
2. On the Setup Welcome screen, click Next to proceed with the installation process. 3. Click Next accept the license agreement and continue the installation. 4. Installation of the Intel Trusted Execution Engine is now complete. Click Finish. MI805 User’s Manual... -
Page 52: Lan Drivers Installation
DRIVERS INSTALLATION LAN Drivers Installation 1. Insert the DVD that comes with the board. Click Intel and then Intel(R) Baytrail Chipset .Click Intel(R) LAN Drivers. 2. Click Intel(R) I21X Giga Network Driver. 3. Click Install Drivers and Software. MI805 User’s Manual... - Page 53 6. Click the checkbox for Drivers in the Setup Options screen to select it and click Next to continue. 7. The wizard is ready to begin installation. Click Install to begin the installation. 8. When InstallShield Wizard is complete, click Finish. MI805 User’s Manual...
- Page 54 DRIVERS INSTALLATION This page is intentionally left blank. MI805 User’s Manual...
-
Page 55: Appendix
Serial Port #4(COM4) 2F0h – 2F7h Serial Port #3(COM3) 2F8h – 2FFh Serial Port #2(COM2) 3B0h – 3DFh Intel(R) HD Graphics 3E8h – 3EFh Serial Port #5(COM5) 3F8h – 3FFh Serial Port #1(COM1) 0D00 – FFFF PCI-e Root Complex MI805 User’s Manual... -
Page 56: Interrupt Request Lines (Irq)
IRQ0 System Timer IRQ3 Serial Port #2 IRQ4 Serial Port #1 IRQ6 Serial Port #5 IRQ7 Serial Port #4 IRQ8 High precision event timer IRQ10 Serial Port #3 IRQ11 Serial Port #6 IRQ22 High Definition Audio Controller MI805 User’s Manual... -
Page 57: Watchdog Timer Configuration
**endptr; char SIO; printf("6106 watch dog program\n"); bTime = strtol (argv[1], endptr, 10); printf("System will reset after %d seconds\n", bTime); if (bTime) else if (bTime > 0 && bTime < 256) A=2; unsigned char result; Set_6106_LD(0x08); gotoxy(1,12); MI805 User’s Manual... - Page 58 APPENDIX return 0; //--------------------------------------------------------------------------- void EnableWDT(int interval) unsigned char bBuf; Set_6106_LD(0x08); Set_6106_Reg(0x30, 0x01); Set_6106_Reg(0xF1, interval); //--------------------------------------------------------------------------- void DisableWDT(void) unsigned char bBuf; Set_6106_LD(0x08); Set_6106_Reg(0x30, 0x00); //--------------------------------------------------------------------------- MI805 User’s Manual...
- Page 59 Lock_6106 (void) outportb(6106_INDEX_PORT, 6106_LOCK); //--------------------------------------------------------------------------- void Set_6106_LD( unsigned char LD) Unlock_6106(); outportb(6106_INDEX_PORT, 6106_REG_LD); outportb(6106_DATA_PORT, LD); Lock_6106(); //--------------------------------------------------------------------------- void Set_6106_Reg( unsigned char REG, unsigned char DATA) Unlock_6106(); outportb(6106_INDEX_PORT, REG); outportb(6106_DATA_PORT, DATA); Lock_6106(); //--------------------------------------------------------------------------- unsigned char Get_6106_Reg(unsigned char REG) MI805 User’s Manual...
- Page 60 APPENDIX unsigned char Result; Unlock_6106(); outportb(6106_INDEX_PORT, REG); Result = inportb(6106_DATA_PORT); Lock_6106(); return Result; //------------------------------------------------------------------------------------ This page is intentionally left blank. MI805 User’s Manual...