Samsung HHSM-G500005-1 Installation Manual page 59

Screed Drying Function
The Samsung unit is equipped with a Screed drying mode, this can be used to assist
with drying the screed and any glue used with the flooring. The screed drying function
runs for a period of 20 days, whilst this function is running "CC" will be displayed on the
controller, DHW function will not operate during this period.
Note: Neither Samsung or Joule accept any liabilities for damages to screed or resins
used whilst using this function. Always check with the screed and or resin manufacture
before using the screed dry function.
TO USE THE SCREED DRY FUNCTION FOLLOW THE STEPS BELOW
1. Power down the MIM unit and remove the front cover
2. Set dip switch K3 to Off.
3. Refit cover to MIM unit and power back up.
4. "CC" should display on the controller after 90 seconds.
5. Screed dry function is now active.
NOTE: DHW Mode will be inactive during screed drying process.
Drying Function logic is as below.
TO CANCEL SCREED DRYING FUNCTION FOLLOW THE STEPS BELOW
1. Power down the MIM unit and remove the front cover.
2. Set dip switch K3 to ON.
3. Refit cover to MIM unit and power back up.
4. Push the Power button and "AU' should now be displayed.
5. System is now in normal operation mode.
59