Chapter 1 Getting Started Congratulations on your purchase of the Notebook PC. Your new notebook features the most innovative advances in portable computing technology. It combines state-of-the-art ergonomics with sophisticated architecture to provide you with a personal computer that is compact, powerful, and easy to use.
Chapter 1 Inventory This computer system is designed for years of productive and pleasurable computing. Use this section to keep details of your purchase. This information will be required should you need to make repairs to your notebook during the warranty period. Update this section when you add new options.
Chapter 1 Safety and Maintenance You can use your computer under a wide range of environmental conditions. However, to ensure long use and continued high performance, consider the following factors when setting up your computer: • Follow all warnings and instructions noted in this documentation and in the Windows Help program.
Chapter 1 • Set the computer on a flat, stable surface. To prevent damage to the computer’s hard disk drive, avoid using the computer where it will be exposed to strong vibration. Checklists After opening the package, carefully inspect the contents. If any of the items is missing or appear damaged, contact your dealer.
Chapter 1 Features High Capacity Hard Disk Drive The computer has a high capacity hard disk drive, to store your favorite programs and large multimedia files. Built-in Modem/LAN Capability Built-in 56k modem and 10/100 Mbps Ethernet port allows you to access the Internet or a local area network (LAN).
Chapter 1 Quick Start Turning on the Computer for the First Time 1. Connect the AC adapter power cord to the AC adapter. 2. Connect the AC adapter to the DC power port on the left side of your computer. 3.
Chapter 1 Loading Windows The following section is for installing the Windows operating system only. If you are installing a different operating system, please check with your vendor for installation details. Your computer will begin loading Windows once you turn on the power.
Chapter 1 Adjusting the Volume You can adjust the volume with hot key combination as below: • Fn + F8 decreases the volume • Fn + F9 increases the volume • Fn + F10 Mute the volume Alternatively, you can adjust the volume with the Windows volume control applet located on the taskbar.
Chapter 1 Turning off Your Computer Turning off the computer properly is important to maintaining your computer. 1. On the Start menu, click Turn 2. Click the radio button Turn Off off Computer. in the Turn off Computer Windows screen, and then click OK.
Chapter 1 Tips for New Owners Take responsibility for backup Back up files often. Users who need to manage large amounts of data may wish to use backup devices such USB drive. If you use your notebook as a networked workstation with system backup, talk to the system administrator about backup procedures for your notebook.
Page 16
Chapter 1 Never take the notebook anywhere without the carrying case A broken screen or case can be costly to repair. Prevent accidents by carrying the computer in a suitable carrying case. Consider using a lock For added security, consider purchasing a Kensington lock to put into the Kensington lock hole on the left side of your computer (see Chapter 2, Left View).
Chapter 2 Hardware and Software This chapter introduces the different components and controls of your notebook computer, including the hardware components, the software, and the audio and video systems. Getting Started Before you begin using your computer, read this chapter to familiarize yourself with the main components installed in the system.
Chapter 2 Left View Kensington Lock Your computer includes a Kensington lock hole to be used with a standard Kensington lock. You can connect the notebook to a large object with the Kensington lock to prevent theft of your notebook. See the documentation that comes with your Kensington lock for more information.
Page 21
Chapter 2 USB (Universal Serial Bus) Ports The Universal Serial Bus (USB) is the latest standard for attaching monitors, input devices, scanners, and other devices to a PC. USB devices can be chained together on a single cable. PCMCIA Card Slot The PC card slot can be used as an interface between your computer and a variety of communications devices, such as network adapters, SCSI adapters, fax/modems, or provide...
Chapter 2 Right View 1. USB (Universal Serial Bus) Ports The Universal Serial Bus (USB) is the latest standard for attaching monitors, input devices, scanners, and other devices to a PC. USB devices can be chained together on a single cable. 2.
Page 23
Chapter 2 3. Optical Drive The Notebook PC comes in various models with different optical drives. See the marketing specifications for details on each model. 4. RS-232/Serial Port The RS232 Port provides the connection for RS232 interface devices such as mice and modem.
Page 24
Chapter 2 Front View 1.Audio-out Jack Connect a stereo headset or external speakers to this jack to listen to multimedia. 2. Microphone-in Jack Connect a microphone this jack to record audio.
Chapter 2 Bottom View Air Vents Battery Release Button Battery Note: Make sure that papers, books, clothing, cables or other objects do not block any of the air vents or else overheating of the Notebook PC may occur.
Chapter 2 LED Status Indicators The power and status indicators light up when a particular function of the computer is active. Each indicator is marked with a symbol. Icon Light Description The computer is reading Green from, or writing to the built- in ODD.
Chapter 2 Function Keys Hold the Fn key while pressing the numbered function key. Function key Description Fn + F3 Toggles backlight On/Off Suspend to RAM/HDD Fn + F4 Suspend mode-Setup from Power Management Toggles between LCD/CRT displays Fn + F5 (LCD LCD+CRT) Fn + F6...
Chapter 2 Touchpad The touchpad is a pressure sensitive pointing device that provides all the features of a two-button mouse. Its primary function is to move the cursor around the screen. The instructions listed below describe how to use the touchpad. 1.
Chapter 2 5. Double-clicking is a common technique for selecting objects or launching programs from icons. Once you have moved the pointer over the object you wish to select, rapidly press the left button two times. This action is commonly referred to as “double- clicking”...
Chapter 2 The Optical Drive Your computer comes with a pre-installed optical drive can read both DVDs and CDs. Your notebook identifies the drive with the latter following the hard drive. If your hard drive is D, then the optical drive will be E. Inserting a Disk 1.
Page 31
Chapter 2 Precautions for Handling DVD-ROM Discs Keep these precautions in mind when handling DVD-ROM discs. • Always hold the disc by the edges; avoid touching the surface of the disc. • Use a clean, dry, cloth to remove dust, smudges, or fingerprints. Wipe from the center outward.
Chapter 2 Connecting the Printer To connect a printer to your notebook via the USB port, use the supplied USB to printer adapter cable. Note: Before use, you must install the driver for the adapter cable. The Express Card Slot The express card slot can be used as an interface between your computer and a variety of communications devices, such as network adapters, SCSI adapters, fax/modems, or provide additional data...
Chapter 2 Note: Please read the instructions included with individual express cards. Some cards may be inserted with power on, while others require that the computer be turned off. Removing a Card Press again to release the card. Express Card Size Restrictions •...
Chapter 2 The Graphics System Your computer has a graphics system, which can easily handle the demands of today's multimedia computing. Screen Controls Brightness Function keys can increase or decrease the brightness of the monitor. • <Fn> + <F6> decreases the LCD brightness •...
Chapter 2 Connecting to an External Monitor The notebook has a VGA monitor port to connect your computer to an external monitor. Using the VGA monitor port Locate the 15-pin VGA monitor port on the left side of your notebook and connect the video signal cable from the external monitor (or the VGA adapter) to the monitor port.
Chapter 2 Communication Components This system provides powerful communication functions, including built-in Fax/Modem and WLAN. Fax/Modem A phone jack on the right side of the computer allows you to connect to the Internet to send and receive data. When used with fax software, it can be used as a fax.
Chapter 2 Information about the Wireless button Wireless LAN button Enables or disables the built- in wireless LAN. When enabled, the wireless status indicator will light. Windows software settings are necessary before use. Even when a Wireless LAN module has not been built-in to your computer, the Wireless LAN indicator lights and remains active when you...
Page 38
Chapter 2 The way of processing communications through the WLAN interface card is the same as that through Ethernet interface card. The “Configuration Tool” is a Window application program. If users have a computer equipped with the WLAN interface card, then users can use it to set up the interface card and show the current configuration and status.
Chapter 3 Power Management Battery Calibration The first time you use a battery, you should calibrate it. The calibration process empties and charges the battery one time. This allows the Windows battery gauge to accurately monitor battery status. To calibrate a battery, follow these steps: Plug in the AC adapter.
Chapter 3 Monitoring Battery Power There are two ways to monitor how much power the battery has left. Click start/Control Panel/Power Options; then click Power Meter. Moving the cursor to the battery icon on the taskbar is the simplest way to check on battery power status.
Chapter 3 Battery Charging When you use the AC adapter to connect your Notebook to a power outlet, the internal battery will automatically begin to recharge. While the battery is charging, the Battery Charge icon on the Indicator panel will be active. When the battery is fully charged, the Battery Charge icon will turn to green.
Chapter 3 Power Saving Tips • Avoid operating the fax/modem, or audio and video applications when using battery power. Operating a fax modem, video, or audio equipment increases the computer's power requirements. • Decreasing monitor brightness can also save power. Decrease brightness by pushing <Fn>...
Page 45
Chapter 3 The cooling fan will automatically turn on. You may feel air coming from a vent at the left side when this happens. If the temperature continues to rise, processor activity will be reduced. You may notice a slight loss of performance when this happens.
Page 47
Chapter 4 Using the BIOS Setup Utility Your notebook has a BIOS setup utility which allows you to configure important system settings, including settings for various optional functions of the computer. This chapter explains how to use the BIOS setup utility. BIOS Setup Menu The BIOS setup Utility allows you to configure your computer’s basic settings.
Chapter 4 Navigating and Entering Information in BIOS Use the following keys to move between fields and to enter information: Select Screen Push the up and down arrow keys to move ↑↓ among selections, then press Enter to make a selection.
Chapter 4 The Main Menu BIOS SETUP UTILITY Main Advanced Boot Security Exit System Overview Use [ENTER] , [TAB] Or [SHIFT-TAB] to select a field. AMIBIOS Version: RX.XX Use [+] or [-] to Configure system Time Processor Type : Intel ® Atom ™ CPU N270 @1.60GHz Speed: 1660MHz Processor Size: 504MB...
Chapter 4 Advanced Menu BIOS SETUP UTILITY Main Advanced Boot Security Exit Battery Learning Function Advanced Setting Legacy USB Support [ Enabled ] Configure SATA as [AHCI] Start FAN Calibration [ Enter ] Battery Calibration [ Enter ] ←→ Select Screen ↑↓...
Chapter 4 Boot menu BIOS SETUP UTILITY Main Advanced Boot Security Exit Specifies the boot 1st Boot Device [SATA] sequence from the Boot Device [CD/DVD] available devices. 3rd Boot Device [Network] A device enclosed in Parenthesis has been disabled in the corresponding type menu.
Chapter 4 Security menu BIOS SETUP UTILITY Main Advanced Boot Security Exit Security Settings Install or Change the password. Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password Change User Password ←→ Select Screen ↑↓ Select Item Enter Change F1 General Help F10 Save and Exit...
Chapter 4 Exit menu BIOS SETUP UTILITY Main Advanced Boot Security Exit Exit Options Exit system setup after saving the changes. Save Changes and Exit Discard changes and Exit F10 key can be used Discard Changes for this operation. Load Optimal Defaults ←→...
Chapter 4 Change User Password With a User password, you can enter the Setup Utility and change or remove the User password, but you cannot enter the Setup Utility and change or remove the Supervisor password, nor enable diskette access if it has been disabled. Change Supervisor Password A supervisor password must be set before a lower-level user password can be set.
Page 56
Appendix A Frequently Asked Questions Q: My screen seems to time out too quickly. I have to constantly hit a key or move the mouse in order to bring it back. How can I adjust the screen time-out? This is part of Windows Power Management. Access Power Management by clicking on Start / Settings / Control Panel / Power Management.
Page 57
Appendix A Double click on the Speaker icon on the task bar. Then, under Microphone Balance, check the Mute box. Q: Because of a software problem, I was unable to shut down power normally. I pressed the power button to force a power off, but it didn't work.
Page 58
Appendix A Save configuration changes and exit setup? [OK] [Cancel]...
Appendix B Statements Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 61
Appendix B About The Modem This equipment complies with Part 68 of FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company.
Appendix B The Telephone Consumer Protection Act of 1991 marks it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending...
Appendix B About the Modem The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. The department does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company.
Appendix B CAUTION FOR AC ADAPTER THIS NOTEBOOK COMPUTER IS FOR USE WITH SUITABLE ADAPTER RATED 20V, 3.25A CAUTION FOR EXPRESS CARD SLOT PLEASE INSERT THE DUMMY CARD WHEN THE SLOT HAS NOT BEEN USED BATTERY CAUTION DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER.
Need help?
Do you have a question about the D13RL and is the answer not in the manual?
Questions and answers