Using The Dynadock; Usb 2.0 Ports (Front And Back Panel) - Toshiba dynadock PA3541 User Manual

Uninstall the Audio Driver
To remove the Audio driver, please click Start > Control
1
Panel and then Add/Remove Programs. Choose
"TOSHIBA USB Audio" from the list and click the Change/
Remove button.
(Sample Image) Remove TOSHIBA USB Audio window
Follow the on-screen directions to finish uninstalling.
2

Using the dynadock

You may connect devices to the appropriate ports on the dynadock
while your computer is running. A slight delay and display flickering
is normal before the computer recognizes the new device.

USB 2.0 Ports (Front and Back Panel)

Connect any USB device to one of the dynadock's six USB ports.
❖ When no device is connected to the port, the indicator light is
off.
❖ If a device is connected to the port and the connection works
properly, the indicator light glows green (on).
❖ If your USB device, such as a printer or optical drive, etc., came
with its own AC adaptor, make sure that it is plugged into the
device and a live electrical outlet.
NOTE
Only the front two USB ports provide power when the computer is
either off, suspended or disconnected. This enables you to re-charge
select MP3 players, cellphones and other devices. Not all devices can
be charged through these ports.
™
dynadock™ User's Manual
26