Peripherals; Setting Up The Dynadock; Install The Software - Toshiba PA3927U-1PRP dynadock U3.0 User Manual

Chapter 1

Setting Up the dynadock™

and Connecting Peripherals
Setting up the dynadock™
This section provides instructions on setting up the dynadock™.
You will need to perform the following steps in the order shown:
1

Install the software

2
Assemble the dynadock™
3 Connect the power adaptor
4 Connect the dynadock™ to your computer
For more information on each step, refer to the appropriate section
below.
Install the software
1 Insert the provided Installation CD into your optical disc drive.
The dynadock™ U3.0 Install Menu appears on your computer
screen.
NOTE
NOTE
If the dynadock™ U3.0 Install Menu does not display, follow the
steps provided below for your operating system:
1) Double-click My Computer on your desktop or click Start, and
then Computer.
2) Double-click the DVD/CD drive icon, and then double-click
AutoRun.exe.
Installation files with the latest drivers also available for download at
support.toshiba.com. Check periodically for updates.
17