NOTE
Please wait until the progress bar is near the end before you connect
the dynadock.
Once the video drivers are installed, the "Audio" driver will be
4
installed automatically. If the dynadock is not detected, the
following message will appear. Please connect the dynadock to
your computer and click Retry to proceed. For detailed
information on how to connect the dynadock, please refer to
"Connecting the dynadock to the Computer" on page 21 of this
manual.
(Sample Image) Not detected the dynadock screen
NOTE
If you click "Cancel", the program will exit the installation of the
driver.
After finishing the installation, the program will request that you
5
restart the computer. Choose "Yes" and click OK to finish the
setup. All devices will take effect after restarting.
(Sample Image) Restart computer screen
dynadock™ User's Manual
16