This completes the installation for computers with Microsoft
After the utility installation is completed, the "Video" driver will
be installed automatically.
Step 1: Select the language of End User License Agreement and
click I Accept.
(Sample Image) Video driver Install screen
During the installation, there will be various screens opening and
closing and the display may flicker during this time.This is normal.
A dialog box may prompt to restart the computer. Please do not restart
at this time in order to install additional drivers.
Step 2: When the dialog box shown below appears, connect the
dynadock to your computer. For detailed information on how to
connect the dynadock, please refer to "Connecting the dynadock
to your computer" section of this manual. Click "OK" to
continue the installation process.
(Sample Image) Not detected the dynadock screen
Once the video drivers are installed, a message will prompt you
to install the "Audio" driver.
If the dynadock is not detected, the previous message will
appear again. Please make sure the dynadock is connected
dynadock™ User's Manual