Select "Eject and Sleep" from the menu.
2
(Sample Image) Eject and Sleep screen
Wait before removing the dynadock from the system.
3
(Sample Image) Undocking screen
If the dynadock is removed from the system successfully, the
4
icon in the system tray will disappear. Disconnect the USB cable
from your computer's USB port.
After that, the system will go into sleep mode.
5
It is important that you correctly disconnect the dynadock by following
CAUTION
the steps above. Failure to do so may cause data loss and/or damage
to your computer and devices connected through the dynadock.
Eject by use of command line
You can run dynadock Utility by command line, please follow the
steps below:
Click Run... on Start menu.
1
Input "C:\Program Files\TOSHIBA\dynadock
2
Utility\TOSUSBSvrCtrl.exe"
program.
dynadock™ User's Manual
/eject, and run the
45