Peripherals; Setting Up The Dynadock; Assemble The Dynadock - Toshiba PA3778U-1PRP dynadock V User Manual

Chapter 1

Setting Up the dynadock™

and Connecting Peripherals
Setting up the dynadock™
This section provides instructions on setting up the dynadock™.
You will need to perform the following steps in the order shown:
1

Assemble the dynadock™

2 Connect the power adaptor
3 Install the software
4 Connect the dynadock™ to your computer
For more information on each step, refer to the appropriate section
below.
Assemble the dynadock™
Slide the dynadock™ onto the base as shown below.
(Sample Illustration) Attaching the base to the dynadock™
18