Download  Print this page


If the audio software has been properly installed and the icon is not on
the system tray, it means the dynadock is connected to a different USB
port from the one originally connected for installation. Re-plug the
dynadock into the original USB port and the icon will appear again.
The utility comes with a friendly graphic user interface to optimize
your audio effects. Most of the settings can be adjusted using the
available sliders, images or buttons. Just make the adjustments to suit
your personal preferences.
Using Virtual 7.1CH Function on 2CH Speakers/headphones
The audio output port on the front panel is used to connect stereo
speakers or headphones. Although 2CH speakers may be connected,
a virtual 7.1CH surround sound experience is possible using the
software's virtual multi-channel function.
To enable the virtual 7.1CH audio function on 2CH speakers or
Windows Vista
In the Analog Output section, select headphone.
(Sample Image) Select headphone
On the panel, click the 7.1 Virtual SPEAKER SHIFTER
button to enable the virtual multi-channel function.The icon will
turn blue and a mark will be shown in the rightside window
when selected.
dynadock™ User's Manual


Table of Contents

   Also See for Toshiba dynadock PA3541

   Related Manuals for Toshiba dynadock PA3541

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: