M.T.H. PREMIER DREYFUSS Operating Instructions Manual page 11

Table of Contents

If you experience poor or no smoke output when the smoke unit is on and has

fluid, check the wick to see if it has become hard, blackened, and unabsorbent

around the heating element. Remove the

smoke unit inspection cover from the

locomotive's body (see Fig. 5). After

removing the chassis and inspection cover

Inspection Cover

screws, lift the inspection plate away and

Screws

inspect the wick. If it is darkly discolored

and hard, it should be replaced.

Replacement parts and wick replacement

instructions are available directly from the

M.T.H. Parts Department

phone: 410-381-2580

e-mail: parts@mth-railking.com

Figure 5. Inspecting the Smoke Unit

mail: 7020 Columbia Gateway Drive,

Columbia MD 21046-1532

Premier Dreyfuss Steam Engine

Table of Contents