Advertisement
Quick Links
Premier
Bombardier Passenger Set
Operator's Manual
Compatibility
The Premier Bombardier Cars easily increase seating
capacity on your hard working passenger lines. The control
unit, found in the 4-car sets, with its additional lights and
cab, gives the illusion that it's taking charge when you
back up a consist. The cars operate on O-42 or larger
curved track.
Please Read Before Use and Save
Advertisement
Related Manuals for M.T.H. Premier Bombardier
Summary of Contents for M.T.H. Premier Bombardier
- Page 1 Bombardier Passenger Set Operator’s Manual Compatibility The Premier Bombardier Cars easily increase seating capacity on your hard working passenger lines. The control unit, found in the 4-car sets, with its additional lights and cab, gives the illusion that it's taking charge when you back up a consist.
- Page 2 Table of Contents Operating Control Car Lights...................3 Changing Coach Car Lights..................4 Changing Control Car Lights..................5 Kadee Mounting......................8 Service & Warranty....................10 CAUTION: ELECTRICALLY OPERATED PRODUCT: Recommended for Ages 14 and up. Not recommended for children under 14 years of age without adult supervision. As with all electric products, precautions should be observed during handling and use to prevent electric shock.
- Page 3 Turning Control Car Lights On/Off Control car lights are operated by a switch inside the car. control switch Switch: Controls headlights and marker lights. Position 1 (position closest to you) = Marker lights on. Headlight and Ditch-lights off. Position 2 (center position) = Marker lights off. Headlight and Ditch-lights on. Position 3 (position farthest away) = Marker lights off.
- Page 4 Changing the Roof Lights- Coach Car To access roof lights: 1. Remove the 10 recessed screws. chassis mounting screws 2. Carefully lift body upward. You will need to pull the body outward, over the door handrails. The sides have to be pulled out and lifted over the door railings.
- Page 5 4. To replace the roof bulbs, grasp the base (not the bulb itself) firmly with a pair of needlenose pliers and pull gently. If you have difficulty reaching the bulbs, you may unscrew the roof light mount and remove it from the car for easier access. Changing the Roof Lights- Control Car 1.
- Page 6 4. To replace the roof bulbs, grasp the base (not the bulb itself) firmly with a pair of needlenose pliers and pull gently. If you have difficulty reaching the bulbs, you may unscrew the roof light mount and remove it from the car for easier access. Headlights and Number Board Lights 1.
- Page 7 To Access the Interior Lights 1. Follow steps 1-3 on page 4 for accessing roof lights, then: 2. Remove the 4 screws on the top level to release the first level light holder. 3. Pull the light holder out and replace the bulbs. If you had to pull any of the lighting wires from their track in order to change the bulbs, tuck them carefully back into place to prevent harmful contact with other internal parts and from hanging down into sight once the car is reassembled and...
- Page 8 Kadee Coupler Mounting To install an O-Scale Kadee coupler, please follow the instructions below. Y ou will need to use the Kadee O-Scale Coupler #806. You can purchase this Kadee coupler from a Kadee Retailer. For your convenience MTH has provided 2 spacers (for each car) for mounting the Kadee couplers.
- Page 9 4. Attach the pilot to the bottom of the base. Then remove the coupler from the truck and reattach the truck to the base. 5. Line the spacer & Kadee Coupler up w/the holes in the undercarriage and screw them down. 6.
-
Page 10: Service And Warranty Information
Service & Warranty Information How to Get Service Under the Terms of the Limited One-Year Warranty When you suspect an item is defective, please check the operator's manual for standard operation and trouble-shooting techniques that may correct the problem. Additional information may be found on the M.T.H.