Connections; Examples Of Connections With Other Equipment - Tascam Celesonic us-20x20 Reference Manual

Hide thumbs Also See for Celesonic us-20x20:

Table of Contents

Guitar

Computer

CAUTION

• Before making connections, turn this unit and all equipment to be connected off (standby).

• The phantom power switches set four input channels at a time. Do not set phantom power to +48V when connecting an unbalanced

dynamic mic.

• Do not connect or disconnect mics while phantom power is set to +48V. Doing so could cause a loud noise and might damage this

unit and connected equipment.

• Set the LINE OUT 1–2 and PHONES 1/2 knobs to their minimum values before changing a phantom power switch setting. Failure to

do so could cause sudden loud noises from monitoring equipment, and this could damage equipment or harm hearing.

• Supplying phantom power to some ribbon mics will break them. If you are unsure, do not supply phantom power to a ribbon mic.

Drums

Bass Guitar

Digital recorder

Drum machine

Example using a US-20x20

5 – Connections

Headphones

Sound module

Powered speakers or

amplifier and speakers

TASCAM US-20x20

Table of Contents