Mixer Page - Tascam Celesonic us-20x20 Reference Manual

Hide thumbs Also See for Celesonic us-20x20:
Table of Contents

Advertisement

MIXER page

"MIXER" page channels 1–2
6 – Using the Settings Panel
Windows Settings Panel screen
NOTE
When the unit is in MIC PRE mode, you cannot make settings
on the "MIXER" page even if you click the "MIXER" tab. (See
"Using the unit as a microphone preamp" on page 28.)
EQUALIZER
1
This unit has a 4-band equalizer (with HIGH, HIGH MID, LOW
MID and LOW bands).
Use the equalizer to increase or decrease the levels of
specific frequency ranges. This can be used, for example,
to enhance the sound of individual instruments, to adjust
the balance of a wide frequency range and to cut specific
unwanted frequencies. (See "EQUALIZER (4-band parametric
EQ) display area overview" on page 18.)
Click the Select (
settings for it.
Equalizer settings are shown here for the channel selected
using its Select (
5
) button of a channel to make equalizer
) button.
5
TASCAM US-20x20
15

Advertisement

Table of Contents
loading

Table of Contents