Tascam Celesonic us-20x20 Reference Manual page 35

I am using SONAR and the performance with my
8
TASCAM US-20x20 interface is not very good. How
do I fix this?
First, make sure that your audio interface is set to ASIO mode:
• Press P to open the Preferences window
• Click "Playback and Recording" from the left column
• Set the Driver Mode to ASIO
If you still have problems, change the Buffer Size in the US-20x20
Settings panel:
• Open the US-20x20 Settings panel
• Click the Interface tab
• Change the Buffer Size to a higher setting
10 – Troubleshooting
I see that the US-20x20 recommends that I change
8
the Windows Power Management settings. How do I
do this?
Windows allows the processor to throttle to half speed when
the computer is idle. However, this can affect the performance
of DAW recording software. TASCAM recommends that this
function be disabled, especially when using a multi-channel
interface such as the US-20x20.
To Change the Power Management settings in Windows:
• Open the Control Panel.
• In Windows 10, right-click the Start button and click the
Control Panel that appears.
• In Windows 8 (including 8.1) this is under "Settings" in
the right pane of the desktop
• In Windows 7 and earlier this is in your Start menu
• Open the Power Options control panel by double-clicking it
• Click "Show Additional Plans"
• Click on "High Performance" in the Power Options
35
TASCAM US-20x20