Advertisement
16. Go Back to the RC tab to calibrate the main controller toggles by
clicking Start. On the radio, move the sticks around to the furthest
to all four corners. Click Finish on the computer. Using the toggles
again, make sure throttle stick up is right and throttle stick down is
left, right is right and left is left. If they do not correspond, click the
buttons on the right side to switch. See:
http://community.xproheli.com/training/naza-software-updates
additional video tutorial.
XP2 Quadcopter GPS
©2014 XPROHELI. All Rights Reserved.
User Manual
XProHeli XPG Brushless Gimbal
Page 6
for
Advertisement
