Advertisement
Programing Guide for Spektrum DX8i with GPS
1. Carefully unbox radio and contents.
2. Internal battery in the DX8 radio will be partially charged out of box,
be sure to fully charge the radio prior to flying.
3. Find the provided 128mb SD flash card disk and install it into the
card slot on the left side of the radio.
4. Preprogramming checklist:
a. Make sure DX8 is binded to receiver (see Spektrum manual)
b. Double check all receiver to NAZA controller connections.
c. Make sure GPS is connected to NAZA PMU and NAZA
controller.
5. On the radio, put all switches (flaps, f.mode, aux 2 etc...) to the
back position.
XP2 Quadcopter GPS
©2014 XPROHELI. All Rights Reserved.
User Manual
XProHeli XPG Brushless Gimbal
Page 0
Advertisement
