19. Select Aux 2. Using the Flap toggle, adjust the percentages to 96%
for the left side and 100% for the right side.
20. Go to the RC tab to verify that the F Mode (Flight Mode) toggle
switch is operating the flight mode slider at the bottom of the
screen and highlighting all three flight mode functions: GPS, ATT.
and Manual. Also check that the failsafe is activating correctly by
flipping the return to home switch (back right two-way switch), the
indicator on the slider should move and highlight in blue the failsafe
mode.
XP2 Quadcopter GPS
©2014 XPROHELI. All Rights Reserved.
User Manual
XProHeli XPG Brushless Gimbal
Page 8