Advertisement
28. Skip Gimbal on computer and select Voltage instead. Set Voltage
protection switch to OFF. This is done because the external voltage
alarms that we use will alert you if a single cell in the battery is low.
29. All of the settings in the NAZA software should automatically save
to the NAZA.
30. Next we will set the control sticks EXPO settings, this is optional but is
highly recommended for everyone.
31. To set the EXPO settings go to the Function List and scroll down to
select D/R and Expo
XP2 Quadcopter GPS
©2014 XPROHELI. All Rights Reserved.
User Manual
XProHeli XPG Brushless Gimbal
Page 14
Advertisement
