Advertisement
34. On the channel (Chan) select Rudder and set as follows:
35. IMPORTANT! Next you will want to save the settings on your DX8 to
the SD flash card. To do this turn off the controller. Hold down roller
on radio and turn on to enter into the System Setup menu. Scroll
down to Transfer SC Card. Go to Select Option and select. Scroll to
Export Model. Then select Export at the bottom.
XP2 Quadcopter GPS
©2014 XPROHELI. All Rights Reserved.
User Manual
XProHeli XPG Brushless Gimbal
Page 16
Advertisement
