Advertisement
running the NAZA software you may need to install the drivers for
the NAZA connection. Windows should take care of this
automatically. If not go to DJI's website to download the latest
drivers and software:
downloads/
12. Open the latest version of the DJI NAZA Assistant. Install any
updates to the firmware if necessary (software will prompt you).
After the upgrade the bar at the bottom will blink from red to green.
Unplug the flight battery, then plug back in to restart the controller.
13. Go to Motor Mixer on computer and select Quad-rotor x.
XP2 Quadcopter GPS
©2014 XPROHELI. All Rights Reserved.
http://www.dji.com/download/naza-m-v2-
User Manual
XProHeli XPG Brushless Gimbal
Page 4
Advertisement
