Advertisement
8. Go to switch select. Switch all to parameters to Inh (inactive) first
and then change the values so it matches as follows:
OPTIONAL:
To control the tilt of the XPG gimbal with the Flap switch you will
want to setup the switch selection so that Flap is set to Aux3 and Mix
is set to Aux2. If you would like to control the tilt with the Knob you
will have to set Knob to Aux3.
9. Exit out to Main Screen, Radio will restart, press down roll button to
enter the Function List.
XP2 Quadcopter GPS
©2014 XPROHELI. All Rights Reserved.
User Manual
XProHeli XPG Brushless Gimbal
Page 2
Advertisement
