Save/Confirm Temperature Settings; Cooling On/Off - KitchenAid KRMF706ESS User Instructions

View Temperature Set Points
1. Press and hold TEMPERATURE for 3 seconds to activate
Temperature mode.
NOTE: To view temperature in degrees Celsius, press the
LIGHT button, under Units, when adjust mode is activated.
To return the display setting to Fahrenheit, press the LIGHT
button again.
When Temperature mode is activated, press TEMP to toggle
between Fridge and Freezer. The display will show the
temperature set point of the selected compartment, and
temperature adjusting information will appear on the display
screen.
Recommended Refrigerator Temperature
Recommended Freezer Temperature
Adjust Temperature Set Points
Refrigerator set point range: 33°F to 42°F (0°C to 5.5°C).
Freezer set point range: -5°F to 5°F (-21°C to -15°C).
1. When Temperature mode is activated, press TEMPERATURE
to select the Refrigerator zone. The display will show the
temperature set point of the selected compartment as shown.
2. Press LOCK to raise the set point, or press OPTIONS to lower
the set point.
3. When you have finished viewing (and adjusting if desired) the
refrigerator set point, press TEMPERATURE, under Select
Zone, to change the display to show the freezer set point.
When the zone has been changed, "FREEZER" appears on
the display screen.
4. Press the LOCK button to raise the set point, or press the
OPTIONS button to lower the set point.

Save/Confirm Temperature Settings

When you have finished adjusting both the refrigerator and
freezer set points, press MEASURED FILL to confirm and to
save the settings.
NOTE: To exit Temperature mode without saving changes, press
the ICE/WATER button under Back at any time, or allow about
60 seconds of inactivity. The temperature mode will turn off
automatically and return to the normal screen.
20 20 20 20 20 20
When adjusting temperature set points,
use the following chart as a guide:
CONDITION:
REFRIGERATOR too cold
REFRIGERATOR too warm
FREEZER too cold
FREEZER too warm /
Too little ice

Cooling On/Off

Your refrigerator and freezer will not cool when cooling is
turned off.
To turn cooling off, press and hold the LOCK and MEASURED
FILL buttons at the same time for 3 seconds. The Cooling Off
icon will blink seven times and then remain lit as shown.
IMPORTANT:
To avoid unintentionally locking the dispenser or changing
other settings, press both buttons at exactly the same
time.
When cooling is off, the dispenser paddles and all controls
except Lock and Measured Fill are disabled.
Press LOCK and MEASURED FILL at the same time.
Press and hold LOCK and MEASURED FILL for 3 seconds
again to turn cooling back on.
Options
IMPORTANT: All options are OFF (default) until selected.
Press the OPTIONS button to open the Options menu and
select among the Max Ice, Filter Status and Max Cool
features.
NOTE: "Max Cool" and "Max Ice" illuminate to indicate when
both features are on.
Press the ICE/WATER button at any time to return to the
Home screen.
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR Setting
1° higher
REFRIGERATOR Setting
1° lower
FREEZER Setting 1° higher
FREEZER Setting 1° lower