KitchenAid KRMF706ESS User Instructions page 24

NOTE: Depending on your model, a measuring cup may be
provided.
A
B
A. Water dispenser paddle
B. Measuring cup (1 cup)
2. Press and hold the OPTIONS and LOCK buttons at the same time
for 3 seconds. The words "Back" and "1 Cup" will appear on the
display screen. Also, the Calibrate Measured Fill icon will illuminate
and remain lit while the Measured Fill feature is being calibrated.
NOTE: You may press ICE MODE "Back" at any time to exit
calibration mode. The Calibrate Measured Fill icon will disappear.
3. Press and release the dispenser paddle, as needed, to dispense
water to the 1 cup fill line.
24 24
NOTE: If overfilling or spilling occurs, discard the water and press
ICE/WATER "Back" to restart the calibration process.
4. When 1 cup of water has been correctly dispensed into the
measuring cup, press the MEASURED FILL button under the word
"Confirm" to confirm the calibration.
A
A. 1 cup of water
5. When Measured Fill calibration has been confirmed the icons will
disappear and the display will return to the home screen.
Dispensing
Press ICE/WATER to toggle through the following choices in a
continuous loop:
Water (default) - Dispenses water
Cubed - Dispenses cubed ice.
Crushed - Dispenses crushed ice
NOTES:
The word "ICE" appears on the display screen when either
crushed or cubed ice is selected.
For crushed ice, cubes are crushed before being dispensed.
This may cause a slight delay when dispensing crushed ice.
Noise from the ice crusher is normal, and pieces of ice may
vary in size.