KitchenAid KRMF706ESS User Instructions page 21

Max Ice
The Max Ice feature assists with temporary periods of heavy ice
use by increasing ice production. Once selected, the Max Ice
feature will remain on for 24 hours unless manually turned off.
To turn on the Max Ice feature, press the OPTIONS button to
access the Options menu, then press TEMPERATURE, under
Max Ice to activate the feature. When the feature is on, the
Max Ice icon will appear on the dispenser display screen.
To manually turn off the Max Ice feature, press the OPTIONS
button to enter Options mode (unless you are already in
Options mode), then press TEMPERATURE, under Max Ice,
again. When the feature has been turned off, the Max Ice icon
will disappear from the dispenser display.
Filter Status
Displays the percentage of use remaining in the water filter (from
100% remaining to 0% remaining).
To access Filter Status, press the OPTIONS button to access the
Options menu, and then press OPTIONS, under Filter Status, to
display the percent of life remaining in the water filter.
ALSO
The water filter status lights will let you know when to change
your water filter.
ORDER FILTER (Yellow) - Order a replacement water filter.
REPLACE FILTER (Red) - Replace the water filter. Replacing
the disposable water filter will automatically reset the water
filter status tracking feature. See "Water Filtration System."
NOTE: REPLACE FILTER will remain illuminated if a filter is
not installed or installed incorrectly.
Max Cool
The Max Cool feature assists with periods of high refrigerator
use, full grocery loads, or temporarily warm room temperatures.
Once selected, the Max Cool feature will remain on for 24 hours
unless manually turned off.
NOTE: If you adjust the refrigerator temperature set point, Max
Cool will turn off.
To turn on the Max Cool feature, press the OPTIONS button to
access the Options menu, then press LOCK, under Max Cool
to activate the feature. When the feature is on, the Max Cool
icon will appear on the dispenser display screen.
To manually turn off the Max Cool feature, press the OPTIONS
button to enter Options mode (unless you are already in
Options mode), then press LOCK, under Max Cool, again.
When the feature has been turned off, the Max Cool icon will
disappear from the dispenser display.
Vacation Mode
In Vacation Mode, the freezer will defrost less often to conserve
energy.
To turn on Vacation mode, press and hold the TEMPERATURE
and OPTIONS buttons at the same time for 3 seconds. When
the feature is on, VAC will appear on the display as shown.
To turn off Vacation Mode, press and hold the TEMPERATURE
and OPTIONS buttons at the same time for 3 seconds. VAC
will disappear and the display will return to the settings as
they were before Vacation Mode was turned on.
NOTES:
During the first hour after Vacation Mode is turned on, opening
and closing the refrigerator door will not affect the setting.
After 1 hour has passed, opening and closing the refrigerator
door will turn off Vacation Mode.
While in Vacation Mode, if Max Ice is turned on or the Door
Ajar alarm sounds, Vacation Mode will be canceled.
Additional Features
Door Ajar Alarm
The Door Ajar Alarm feature sounds an alarm when the refrigerator
door(s), drawers, and freezer drawer is open for 5 minutes and
cooling is turned on. The alarm will repeat every 2 minutes. Close
all doors and drawer to turn it off. The feature then is reset and will
reactivate when either door is left open again for 5 minutes.
NOTE: To mute the audible alarm while keeping the doors
open, such as while cleaning the inside of the refrigerator,
press any button on the control panel. The alarm sound will be
temporarily turned off, but the Door Ajar icon will still be
displayed on the dispenser control panel.
Disabling Sounds
To turn off control and dispenser sounds, press and hold ICE/
WATER and MEASURED FILL at the same time for 3 seconds.
All normal operating tones are disabled. Only alert tones will
be audible.
To turn all sounds back on, press and hold ICE/WATER and
MEASURED FILL at the same time for 3 seconds again.
Power Outage
The Power Outage indicator lets you know if the power supply to
the refrigerator has been off, and the freezer temperature has risen
to 18°F (-8°C) or higher.
The control panel temperature display will read "PO," and an alert
tone will sound three times. "Confirm" will blink until you
acknowledge the power outage by pressing MEASURED FILL
under "Confirm."
Once the power outage has been confirmed, the "PO" will
disappear, and the display will return to the Home screen.
21 21 21 21 21 21