Table of Contents
Advertisement
23
Connecting Cameras to the Local
Area Network (LAN)
The M4400 Series can support up to 16 IP cameras, in addition to the MPX/analog chan-
nels it already has. Since the system does not have PoE (Power over Ethernet), the cam-
eras must be connected to the same Local Area Network (LAN) as the system and
powered by a separate PoE switch (not included) or power adapter (not included).
Follow the steps below to enable IP cameras and add them over the network.
Prerequisites
• Connect the IP cameras to the same LAN as the system.
• Power the IP cameras via a PoE switch or power adapter.
Step 1 of 2: Enable IP camera channels in the system:
1. Right-click and select Main Menu.
2. Log in using the admin account (default User Name: admin; default Password:
000000).
3. Click
and then Cable Type.
4. Click the Add IP Cam button to add the 16 IP camera channels.
5. Wait for the system to restart.
Step 2 of 2: Add cameras to the system:
1. Right-click and select Remote Device.
2. Log in using the admin account (default User Name: admin; default Password:
000000).
#LX400057; r. 1.0/24460/24461; en-US
163
Advertisement
Table of Contents
