Broadconnect 9600 Series User Manual page 21

Introduction: The Phone Stand
When changing the position of the stand, be sure to check that the stand has locked into the chosen position. A small
plastic peg is located just under the phone's handset. This peg can be reversed to more securely anchor the handset
when the stand places the phone in an upright position.
9608 Phones
The stand cannot be flipped to another position except by removing it to change the position. The angle of the display is
not adjustable on these phones.
Other 9600 Phones
Once attached, the stand can be used in either position to change the angle of the phone. The angle of the phone can
also be adjusted as shown below. The angle of the display can also be adjusted.
Other Stands
If the phone needs to be used in a situation other than on a desk, for example wall-mounted, a number of other stand
designs are available from Avaya. Contact your system administrator.
9600 Series User Guide Page 21
IP Office Issue 05d (Wednesday, March 07, 2012)