Setting The Time; Setting The Time Offset - Broadconnect 9600 Series User Manual

21.4 Setting the Time

The process below can be used when the telephone system does not obtain the time and date automatically. On systems
that are configured to obtain the time automatically, the option for checking the
instead.
1. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
2. Use the up and down
3. Use the up and down
present then you may not have been configured as a system phone user by your system administrator.
4. Enter your security PIN (login code) and press Done.
5. Use the up and down arrow keys to highlight Time. Press Select.
6. The current time being used by the telephone system is displayed.
7. Enter the required time in 24-hour clock format:
· Use either the * or # keys to enter the : separator.
· To delete the previous digit or character entered press Bksp.
8. When a complete and valid time has been entered, the display will request confirmation by showing the Set soft
key option.
9. To set the time as the new time to be used by the telephone system press the Set soft key.

21.5 Setting the Time Offset

The process below can be used when the telephone system does not obtain the time and date automatically. On systems
that are configured to obtain the time automatically, the option for checking the
instead.
1. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
2. Use the up and down
3. Use the up and down
present then you may not have been configured as a system phone user by your system administrator.
4. Enter your security PIN (login code) and press Done.
5. Use the up and down arrow keys to highlight Local Time Offset. Press Select.
6. The current offset is displayed.
7. Enter the offset required in hours and minutes:
· To enter the : separator press either the * or # key.
· To delete the previous digit or character entered press the Bksp key.
· To change the offset from between positive or negative press the
8. When a valid offset has been entered, the Set soft key is displayed.
9. To apply the offset to the current telephone system time press the Set soft key.
9600 Series User Guide
IP Office
arrow keys to highlight Phone User. Press Select.
arrow keys to highlight System Administration. Press Select. If the option is not
arrow keys to highlight Phone User. Press Select.
arrow keys to highlight System Administration. Press Select. If the option is not
Time Server Status
139
PHONE key and then press the
Time Server Status
139
PHONE key and then press the
right arrow key.
Issue 05d (Wednesday, March 07, 2012)
is available
is available
Page 140