Checking The Time Server Status - Broadconnect 9600 Series User Manual

21.3 Checking the Time Server Status

For systems that automatically obtain the time from a time server, this option is available in place of the
and Time Offset functions. It allows you to check the current status of the time server and the information the
140 140
system has obtained from the time server.
1. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
2. Use the up and down
3. Use the up and down
present then you may not have been configured as a system phone user by your system administrator.
4. Enter your security PIN (login code) and press Done.
5. Use the up and down
6. The time server information is listed. It includes the address of the time server, the current local time and the UTC
time. If the phone system is configured for daylight savings then the current amount of daylight savings being
applied to the local time is also shown.
9600 Series User Guide
IP Office
arrow keys to highlight Phone User. Press Select.
arrow keys to highlight System Administration. Press Select. If the option is not
arrow keys to highlight Time Server Status. Press Select.
System Administration: Setting the Date
Date
PHONE key and then press the
Issue 05d (Wednesday, March 07, 2012)
, Time
138
Page 139