Specifications; Beforeassembly - Schwinn AD2 Assembly Manual / Owner's Manual

50"
(127 cm)
MaximumUserWeight:
PowerRequirements:
Operational Voltage:
250 Ibs. (113 kg)
2 AA batteries (LR6) - not
included
1.0 - 3.3VDC
(63.5 cm}
BeforeAssembly
Select the area where you are going to set up and operate your machine. For safe operation,
the location must be on a hard, level surface. Allow a workout area of a minimum 82" x 61"
(2.1m x 1.5m).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
1. Read and understand the "important Safety Instructions" before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten,
and the left (counterclockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt
through the holes.
5. The assembly requires 2 people.