KYMCO Super 8 ForU Operating Manual page 60

Fitting the front wheel:
Push the wheel onto the stem (3) as far
as the wheel stop.
Screw the wheel fixing self-locking bolt
(4) and tighten it (size 17 mm).
Lower the scooter.
Retighten the self-locking bolt (4).
Fitting the rear wheel:
Place the key (5) in the slot in the drive
shaft (6).
NOTE
The key is rectangular. Place
it with its widest side in the
axle slot.
Push the wheel onto the stem and align
the wheel hub groove (7) with the key in
the drive shaft.
Push the wheel on as far as the drive
shaft stop.
60
Repairs
Fitting the front wheel
Locating the axle key
Fitting the rear wheel