Refitting Battery Cables - KYMCO Super 8 ForU Operating Manual

17.7.2 Refitting battery cables

Fire and burn hazard if battery terminal is
short-circuited!
• Never touch both battery terminals simultaneously with
tools (shorting out).
• Terminals are protected with insulating caps. Only ever
remove the insulating cap from the terminal which you
are going to loosen.
Tools required:
2 x ring spanner; size 10 mm
Remove the batteries from the scooter .
Refitting the battery cable:
First (1) loosen the terminal on the
battery negative terminal (black cable)
and remove the cable.
Then (2) loosen the terminal on the
battery positive terminal (red cable)
and remove the cable.
Replacing the battery and connect the
battery cable in reverse order:
First connect the cable to the battery
positive terminal (2).
Then connect the cable to the battery
negative terminal (1).
Reinserting the batteries into the scooter
Repairs - batteries
65