Operation Indicator Blink Codes; Blink List - KYMCO Super 8 ForU Operating Manual

16.3 Operation indicator blink codes

The operation indicator (1) on the dashboard
is also designed as a display for error
messages.
Various faults in the drive electronics are
displayed using blink sequence is as listed.

16.3.1 Blink list

Instrument indicator
Error code LED indicator
slight blink
002,003 8xblink
0203,0204 8xblink
0810 0814~17 7xblink
1000 blinking quickly
1400 3xblink
1500 ~1502 9xblink
1600 10xblink
1705 8xblink
1802 1805 8xblink
1B20 8xblink
1D02 7xblink
1E03
6xblink
2102 8xblink
2C00,2C01 1xblink contiute slowlyBatteries voltage too low
2D01 8xblink
3100 3102 8xblink
3210 3213 8xblink
3600~360E 8xblink
3B01 2xblink
4401 8xblink
7000~7001 4xblink
Troubleshooting
Cause
Auto switch off(scootor stay 10min )，KEY-ON again
Fault in ECU or wires fall off
Fault in ECU or wires fall off
Fault in drive lever, Lever does not reset
Charging the scootor, scootor does not run
Fault to motor brake or wires fall off
Fault to motor brake
Battery voltage too low
Fault in ECU or wires fall off
Fault in ECU or wires fall off
Fault in ECU or wires fall off
Fault in drive lever, Lever does not reset
Charging the scootor, scootor does not run
Fault in ECU or wires fall off
Fault in ECU or wires fall off
Fault in ECU or wires fall off
Fault in ECU or wires fall off
Fault in ECU or wires fall off
Motor cable short-circuited
wires fall off
Parking brake off
57