Working Step Summary; Removing The Seat; Removing The Batteries - KYMCO Super 8 ForU Operating Manual

In just a few steps you can
dismantle the scooter down to
the following components to
make it ready for transport:
1. Chassis
2. Batteries
3. Drive unit
4. Rear panelling
5. Seat unit

13.3.1 Working step summary

1. Remove the seat unit.
2. Remove the rear panelling.
3. Remove the batteries.
4. Fold the tiller down.
4. Disengage the drive unit from the chassis.
13.3.2 Removing the seat and rear panelling
Tilt the seat backrest forwards.
Lift the seat while pulling the seat lock
(a) out of the seat support (1).
Pull the rear panelling(b) off the scooter
upwards.

13.3.3 Removing the batteries

Press the locking device on the plug and
disconnect connecting plugs on the cable.
Remove the battery belts.
Remove the batteries.
Transporting t h e s c o o t e r
(1) (a)
(b)
47