Optimus UMX-02/0 Operating Instructions Manual page 75

5. Enter the number of the output and/or the
groups that make up the new group.
To do this, use the numeric keypad to enter
the number of the fi rst element that forms the
group (an output number or that of another
group) and press key
second element and press
completing the sequence of elements that
make up the group.
6. Press MENU/OK to save the data.
7. Press MENU/OK once again to create another
group or CANCEL to exit the menu.
• II. Modifi cation of a group
1. Select the option Modify from the Groups
menu in order to change the elements that
form a group which already exists.
2. Press MENU/OK.
3. Enter the number of the group that you wish to
modify.
4. Press MENU/OK.
5. Delete or add elements to the group.
a. To delete elements from the group: Use the
navigation keys to move the cursor to the
element that you wish to delete and press
the DEL key, deleting the characters one by
one.
b. To add elements to the group: Use the
navigation keys to move the cursor to the
position of the group where you wish to add
an element and enter the data using the
numeric keypad.
6. Press MENU/OK to save the changes.
7. Press MENU/OK once again to modify another
group or CANCEL to exit the menu.
UMX-02/0 v1.0
UMX-02/0
5
. Then enter the
5
, and so on until
• III. Deletion of a group
1. Select the option Delete from the Groups
menu in order to delete a group.
2. Press MENU/OK.
3. Enter the number of the group that you wish to
delete.
4. Press MENU/OK.
5. Press MENU/OK again to delete the group or
CANCEL to reject the deletion.
• IV. List
Through this option a list with all the existing
groups can be viewed. Furthermore, groups can
be deleted or modifi ed.
1. Select the option List from the Groups menu.
2. Press MENU/OK.
3. Using the navigation arrows, select a group
number.
4. Press MENU/OK.
5. Select Edit or Delete.
a. Edit: The elements that form the group can
be viewed or the composition of the group
can be modifi ed.
1. Press MENU/OK.
2. The composition of the group is displayed
on the screen. To modify it, follow step
no. 5 of section II. Confi guration /
3.6.2. Confi guration of groups / II.
Modifi cation of a group.
3. Press MENU/OK.
b. Delete: This deletes the selected group.
1. Press MENU/OK.
2. Press MENU/OK once again to delete
the group or CANCEL to reject the
deletion.
6. Press CANCEL to exit the menu.
ENGLISH
Eng
75